Wire gauge andsize guide
Quick reference for the sizes we sell. Thicknesses are the trade sizes we sell; brands can differ slightly.
01Wire gauge to mm
Higher gauge number = thinner wire.
| Gauge | Thickness (mm) | Common use |
|---|---|---|
| 6 | 4.88 | Heavy fencing, line wire |
| 8 | 4.00 | Fencing line wire, frames |
| 10 | 3.00 | Fencing, fabrication |
| 11 | 2.70 | Fencing, tying |
| 12 | 2.50 (Tata 2.64) | Fencing, mesh, tying |
| 14 | 2.00 | Tying, light fencing |
| 16 | 1.60 | Tying, hardware |
| 18 | 1.25 | Binding wire, tying |
| 20 | 0.90 | Binding wire, light tying |
| 22 | 0.70 | Fine tying, crafts |
| 24 | 0.55 | Fine tying |
| 27 | 0.40 | Very fine work |
02Barbed wire: size and length
Size = line wire gauge x barb gauge. 12 x 12 is the strongest; 14 x 14 gives the most length per kg.
| Brand | Size | Packing, about | Length, about |
|---|---|---|---|
| Tata | 12 x 12 | 28 kg | 520 ft |
| Tata | 12 x 14 | 28 kg | 700 ft |
| Tata | 14 x 14 | 28 kg | 950 ft |
| First Wire | 12 x 12 | 23 kg box | 625 ft |
| First Wire | 12 x 14 | 23 kg box | 750 ft |
| First Wire | 14 x 14 | 23 kg box | 1000 ft |
| Bansal 120 GSM | 12 x 14 | 30 kg | 26 ft per kg |
| Commercial | 12 x 12 / 12 x 14 / 14 x 14 | 32 kg | 18 / 24 / 32 ft per kg |
03Welding electrode sizes
A rough guide only; your welder and the job decide.
| Size (mm) | Often called | Roughly for |
|---|---|---|
| 2.50 | Thin rod | Thin sheet, light work |
| 3.15 | "Small box", "ten number" | Most general fabrication |
| 4.00 | "Big box", "eight number" | Thicker sections, structural |
| 5.00 | — | Heavy sections |
04Mesh sizes
| Size | Means | Use |
|---|---|---|
| 4 x 20 … 8 x 20 | 4 to 8 holes per inch, 20 gauge wire | Brickwork |
| 6 x 22 … 10 x 22 | 6 to 10 holes per inch, 22 gauge wire | Plastering |
| 14 x 26, 16 x 26 | Mosquito mesh | Windows, ventilators |
05Self drilling screw markings
| Marking | Means |
|---|---|
| 10-16 | Number 10 screw, 16 threads per inch |
| 12-14 | Number 12 screw, 14 threads per inch |
| 19 – 100 mm | Length: choose by sheet and purlin thickness |
